Best Enclosed Laser Engravers (October 2026)
An enclosure keeps laser light in, smoke under control and pets and children out of the beam. If the machine will live indoors, in a classroom or near other people, start here.
Top picks
How we rank: by our own scores for power, speed, ease of use, safety and value, from the maker's published specs and independent tests where they exist. Some links earn us a commission (for example TwoTrees, SainSmart, Gweike and Amazon). That never changes a score or the order of a list (disclosure).
The 8 best, ranked
from $2,999 at xTool, checked Oct 22
- Power 55 W optical
- Work area 600 × 308 mm
- Form Enclosed
- Air assist Built in
Best for: Makers and small businesses who want a real CO2 cutter for wood and acrylic products without building a dedicated laser room
Why we like it
- Cuts acrylic in any color, including clear, which no diode can do
- 55W CO2 cuts 18 mm hardwood in one pass, far faster than any diode
- Dual 16MP cameras and LiDAR autofocus make placing jobs close to point and shoot
Watch out for
- 45 kg with a 1000 x 639 mm footprint, so it needs a solid bench and two people to move
- The glass CO2 tube is a consumable rated for about 6,000 to 8,000 hours
from $6,999 at xTool, checked Oct 22
- Power 80 W optical
- Work area 915 × 458 mm
- Form Enclosed
- Air assist Built in
Best for: Small businesses cutting and engraving wood and acrylic in volume who want a large, highly automated Class 1 CO2 machine and have the floor space for it
Why we like it
- 80W CO2 with claimed one-pass cuts of 20 mm basswood and 25 mm acrylic; Tom's Hardware cut 15.5 mm pine in one pass
- Large 915 x 458 mm bed plus a motorized AutoLift base with 220 mm of working height
- Class 1 rated, with lid interlocks, eight flame sensors and a CO2 fire suppression module
Watch out for
- $6,999 for the machine alone; the stand, honeycomb, rotary, conveyor and IR module are all extra
- 105 kg and 1250 x 780 mm: reviewers needed three or four people to unpack and lift it
from $1,699 at xTool, checked Oct 22
- Power 40 W optical
- Work area 498 × 319 mm
- Form Enclosed
- Air assist Included
Best for: Hobbyists and small sellers who want a powerful diode cutter for wood and dark acrylic that is safe to run in a shared space
Why we like it
- Class 1 enclosure means no safety glasses or laser curtain for normal use at home
- 40W optical diode cuts 15 mm plywood or black acrylic in a single pass
- Large 498 x 319 mm work area plus a passthrough for long boards
Watch out for
- No camera, so you place jobs with the red-dot pointer instead of a live preview
- Cannot cut clear or blue acrylic, and bare metal needs the optional IR module
Full review and specs · Compare with SainSmart Genmitsu L8 20W
from $699 at SainSmart, checked Oct 22
- Power 20 W optical
- Work area 400 × 400 mm
- Form Enclosed
- Air assist Included
Best for: Home users who want a 20W diode in a real Class 1 enclosure with camera and air assist in the box
Why we like it
- Class 1 enclosure with door interlock, flame sensor, tilt stop, e-stop and key switch
- Ships pre-assembled with air pump, honeycomb and a LightBurn-compatible camera
- 40,000 mm/min rated speed is fast for a diode
Watch out for
- Manual focus with gauge blocks; one owner found the supplied gauges did not match the manual
- No published machine weight, and the box is a large 715 x 621 mm
from $2,200 at OMTech, checked Oct 22
- Power 55 W optical
- Work area 510 × 300 mm
- Form Enclosed
- Air assist Built in
Best for: Small shops and serious hobbyists who want an all-in-one enclosed CO2 that runs LightBurn offline
Why we like it
- Water chiller, 18.8 cfm air assist pump and 282 cfm exhaust fan are all built in
- Runs RDWorks or LightBurn offline over USB, Wi-Fi or Ethernet, with no cloud account needed
- 5MP camera and one-click autofocus for quick placement
Watch out for
- RDWorks is dated and clunky, and LightBurn costs extra in the base package
- Rotary is not included in the base package
Full review and specs · Compare with Gweike Cloud Pro II 50W
from $1,659 at Gweike, checked Oct 22
- Power 50 W optical
- Work area 510 × 300 mm
- Form Enclosed
- Air assist Built in
Best for: Makers who want an all-in-one enclosed 50W CO2 with the rotary included, if they can catch it in stock
Why we like it
- Water chiller, air assist compressor and exhaust fan are all built in, so there is no external plumbing to buy
- Rotary included in the price, which most rivals sell as an extra
- 5MP wide-angle camera plus autofocus for placing designs on scrap and odd shapes
Watch out for
- Shown as sold out on Gweike's US store, as are the 55W and RF tube versions
- Gweike's browser software runs jobs slower than the offline app or LightBurn
from $499 at xTool, checked Oct 22
- Power 10 W optical
- Work area 426 × 320 mm
- Form Enclosed
- Air assist Built in
Best for: Crafters and families who want a safe, camera-guided enclosed laser for a shared room, and sticker or decal makers who will add the color printer
Why we like it
- Class 1 enclosure with lid and baseplate interlocks and flame detection, so it suits a shared craft room
- Dual cameras, autofocus and thickness measurement: place the material, close the lid and it lines the job up
- Optional CMYK inkjet with true black (1200 x 1200 dpi) makes it a print then cut machine for stickers, decals and puzzles
Watch out for
- Only 26 mm of material height with the baseplate fitted, and no riser base, honeycomb or conveyor support
- No blade or pen: the M1 Ultra's blade cutting for vinyl and fabric is gone
Full review and specs · Compare with Creality Falcon2 Pro 60W
from $1,899 at Creality, checked Oct 22
- Power 60 W optical
- Work area 400 × 400 mm
- Form Enclosed
- Air assist Included
Best for: Makers and small shops who mostly cut thick wood and dark acrylic and want that power in a Class 1 box rather than an open frame
Why we like it
- 60W optical diode (twelve 5.5W emitters combined) cuts thick softwood: Maker Hacks cut 19 mm plywood in a single pass
- Large 400 x 400 mm bed for an enclosed diode machine
- Class 1 enclosure with flame, airflow and dirty-lens monitoring, tilt stop and key lock
Watch out for
- No autofocus: you set focus with a block, and Maker Hacks found the head sagged once the block was removed
- Arrives flat-packed, so you assemble the enclosure frame and panels yourself, despite FAQ copy calling it fully pre-assembled
All 14 compared
| # | Laser | Type | Optical power | Work area | Price | Overall | Value | Safety |
|---|---|---|---|---|---|---|---|---|
| 1 | xTool P2S | CO2 laser | 55 W | 600 × 308 mm | $2,999 | 82 | 80 | 85 |
| 2 | xTool P3 80W | CO2 laser | 80 W | 915 × 458 mm | $6,999 | 81 | 62 | 92 |
| 3 | xTool S1 40W | Diode laser | 40 W | 498 × 319 mm | $1,699 | 78 | 76 | 90 |
| 4 | SainSmart Genmitsu L8 20W | Diode laser | 20 W | 400 × 400 mm | $699 | 76 | 80 | 90 |
| 5 | OMTech Polar Lite 55W | CO2 laser | 55 W | 510 × 300 mm | $2,200 | 75 | 78 | 88 |
| 6 | Gweike Cloud Pro II 50W | CO2 laser | 50 W | 510 × 300 mm | $1,659 | 74 | 84 | 88 |
| 7 | xTool M2 | Diode laser | 10 W | 426 × 320 mm | $499 | 74 | 80 | 90 |
| 8 | Creality Falcon2 Pro 60W | Diode laser | 60 W | 400 × 400 mm | $1,899 | 74 | 68 | 88 |
| 9 | Creality Falcon A1 Pro 20W | Diode laser | 20 W | 358 × 268 mm | $879 | 72 | 62 | 90 |
| 10 | LaserPecker LX2 | Diode laser | 20 W | 500 × 305 mm | $1,499 | 72 | 62 | 90 |
| 11 | AtomStack Atelier | Galvo diode laser | 12 W | 120 × 120 mm | $599 | 71 | 72 | 86 |
| 12 | Creality Falcon A1 10W | Diode laser | 10 W | 305 × 381 mm | $466 | 70 | 66 | 88 |
| 13 | Glowforge Pro HD | CO2 laser | 45 W | 495 × 279 mm | $7,999 | 66 | 38 | 82 |
| 14 | Creality Falcon A1C 5W with AI Camera | Diode laser | 5 W | 150 × 150 mm | $299 | 62 | 74 | 86 |
Frequently asked questions
What is the best enclosed laser engraver?
On our scores it is the xTool P2S (82/100, from $2,999 at xTool, checked Oct 22). Makers and small businesses who want a real CO2 cutter for wood and acrylic products without building a dedicated laser room.
Do I need ventilation for a laser engraver?
Yes. Every laser on this list makes smoke and fumes. Vent it outside through a window kit or duct, or use a proper fume extractor, and never cut PVC or vinyl, which release chlorine gas.
Diode, CO2 or fiber?
Diode for affordable wood and leather work, CO2 for clear acrylic, thick wood and production speed, fiber for marking and engraving metal.