Image: Sainsmart
Sainsmart Genmitsu PROVerXL 2x2
Sainsmart
Best for: Woodworkers who want a 2x2 machine with ball screws and closed-loop motors and plan to upgrade the spindle later
Typical starting price
$2,599Editorial baseline for this machine
Overall score
Best current buying path
Where to buy
SainSmart: $2,599 · checked Oct 2
- Shipping varies by retailer
- Check manufacturer site for availability
Affiliate link. We may earn a commission at no extra cost.
Quick verdict
The PROVerXL 2x2 is Genmitsu's mid-size rail and ball-screw machine: HG20 and HG15 linear guides, 20mm ball screws on X and Y, closed-loop NEMA23 motors and a 32-bit GRBL controller with built-in Wi-Fi. Travel is 679 x 679 x 113mm and the machine weighs 90kg net. The motion system is a clear class above the desktop 4030 and 4040 machines. The weak link out of the box is the 710W trim router, which caps how hard you can push it, and a spindle upgrade adds cost on top of $2599. At this price it sits close to Genmitsu's own PRONAX Forge, so check what that buys you before ordering.
Who this fits best
Woodworkers who want a 2x2 machine with ball screws and closed-loop motors and plan to upgrade the spindle later
Buy this if
Woodworkers who want a 2x2 machine with ball screws and closed-loop motors and plan to upgrade the spindle later. Ball screws and profile linear rails on every axis.
Skip this if
Comes with a 710W trim router, which undersells a 90kg ball-screw frame, and max speed of 5000 mm/min is modest for a machine this size.
What else you still need
Budget for a sturdy table for a 1161 x 1142mm footprint and 90kg, a dust collector or big shop vac for the included dust shoe, proper end mills, and CAM software (VCarve Desktop bundle adds $300). If you want to use the frame fully, add a 1.5-2.2kW water-cooled spindle with VFD and coolant setup, which Sainsmart sells as an option.
Material reality check
Hardwoods, plywood, MDF and plastics are its home ground and the ball screws and rails hold accuracy well across the bed. Aluminium and brass are realistic with the stiffer motion system, but the 710W router and 5000 mm/min ceiling mean light, patient passes until you fit a real spindle.
Better alternative if...
you can stretch a few hundred dollars further, the PRONAX Forge gives you a bigger 800 x 800 bed, a 2.2kW spindle and a tool changer. See Genmitsu PRONAX Forge
Where it wins
- Ball screws and profile linear rails on every axis
- NEMA23 closed-loop steppers, so lost steps get caught instead of ruining a long job
- 679 x 679mm bed handles cabinet parts, signs and batch work
- Hybrid MDF and aluminium spoilboard, Wi-Fi module, Z-probe and dust shoe included
- Ships largely pre-assembled
Where it falls short
- Comes with a 710W trim router, which undersells a 90kg ball-screw frame
- Max speed of 5000 mm/min is modest for a machine this size
- Only 113mm of Z travel
- X gantry is an aluminium extrusion that Sainsmart itself admits looks thin
- Priced close to machines that ship with a 2.2kW spindle and tool changer
Specifications
679 × 679 mm
4610 cm²
710W
710W AC compact trim router, 65mm mount, ER11 collets (1/4" and 1/8"), 1.5-2.2kW water-cooled spindle optional
32-bit GRBL 1.1h controller with built-in Wi-Fi, NEMA23 closed-loop steppers, inductive and hard limit switches
90 kg
$2,599
premium
Full specification table
Relative to database
Benchmark Scores
Overall Score
Composite across 5 dimensions
Community Sentiment
We have not summarised owner feedback for the Sainsmart Genmitsu PROVerXL 2x2 yet, so this section is intentionally left without claims. Check the sources for current owner discussions.
Community sentiment is aggregated from forums, Reddit, Discord, and manufacturer communities. Individual experiences may vary.