Image: TwoTrees
TwoTrees TTC3018 Pro CNC Router
TwoTrees
Best for: Beginners who want the cheapest sensible way to learn CNC basics on wood, plastic and PCB engraving
Typical starting price
$199Editorial baseline for this machine
Overall score
Best current buying path
Where to buy
TwoTrees: $199 · checked Oct 23
- Shipping varies by retailer
- Check manufacturer site for availability
Affiliate link. We may earn a commission at no extra cost.
Quick verdict
The TTC3018 Pro adds a metal Z module and offline connectivity to a small lead-screw machine. Its 775 spindle suits engraving and light cuts, but published power data do not establish shaft output. The 40mm Z range must accommodate tooling and workholding; it is not a stock-thickness allowance. The maker's listing contains obvious copy errors, so check the actual specification and setup.
Who this fits best
Beginners who want the cheapest sensible way to learn CNC basics on wood, plastic and PCB engraving
Buy this if
Beginners who want the cheapest sensible way to learn CNC basics on wood, plastic and PCB engraving. $199 gets a complete, GRBL-based 3018 with a metal Z-axis module instead of the plastic one on the base TTC3018.
Skip this if
775 brushed motor at about 8000 RPM is weak; TwoTrees rates the whole machine at 33W, and only 40mm of Z travel limits thicker stock and longer bits.
What else you still need
Suitable 3.175mm tooling, workholding, eye protection and extraction; verify electrical and mechanical compatibility before fitting an upgraded spindle.
Material reality check
Start with wood and plastics. Metal engraving is advertised, but reliable metal pocketing was not verified.
Better alternative if...
you want a 3018 with a stronger spindle and a larger beginner support community. See Genmitsu 3018-PROVer
Where it wins
- $199 gets a complete, GRBL-based 3018 with a metal Z-axis module instead of the plastic one on the base TTC3018
- Built-in Wi-Fi and TF card mean you can run jobs without a laptop tethered over USB
- Plug-and-play TC20 laser module option turns it into a small laser engraver
- Use a compatible GRBL post and check exported toolpaths before running
- Light and small enough (6.8 kg) to live on a shelf and come out for a job
Where it falls short
- 775 brushed motor at about 8000 RPM is weak; TwoTrees rates the whole machine at 33W
- Only 40mm of Z travel limits thicker stock and longer bits
- One owner reports excessive Z-axis friction from an overly tight nut spring
- TwoTrees' own listing contains copy-paste errors (a 600 x 500mm area and pet sensors), so read the spec table, not the feature blurbs
- The stated 0.1mm accuracy is not a demonstrated tolerance for finished parts
Specifications
300 × 180 mm
540 cm²
33W
775 brushed DC spindle, 12-24V, 3.175mm shank tooling
MKS DLC32 V2.0 (Grbl_ESP32) with A4988 drivers, built-in Wi-Fi, TF card and USB
6.8 kg
$199
budget
Full specification table
Relative to database
Benchmark Scores
Overall Score
Composite across 5 dimensions
Community Sentiment
We have not summarised owner feedback for the TwoTrees TTC3018 Pro CNC Router yet, so this section is intentionally left without claims. Check the sources for current owner discussions.
Community sentiment is aggregated from forums, Reddit, Discord, and manufacturer communities. Individual experiences may vary.