End Mill Compression
SpeTool 1/8" Compression Spiral
SpeTool
$10.99
Overview
SpeTool's 1/8-inch compression bit brings the benefits of compression cutting to smaller diameter work. Perfect for thin plywood and laminate cuts where both faces need to be clean. The smaller diameter allows tighter curves while maintaining the tear-free edges that compression geometry provides.
Best for
Clean cuts on both faces of thin plywood and laminated materials.
Specifications
Shank Diameter
1/8"
Cutting Diameter
1/8"
Flute Count
2
Material
Solid Carbide
Coating
Uncoated
Type
Compression
Material Compatibility
Plywood MDF Laminates Thin veneered panels
Not rated for aluminum. Use a ZrN or DLC coated single-flute end mill for aluminum cutting.
Pros
- Clean both faces at small diameter
- Tighter curves than 1/4" compression
- Good for thin materials
- Affordable
Cons
- Very small transition zone
- Requires precise depth control
- Not for thick materials
- Limited chip evacuation