Commenti per Info router CNC

Commenti su Kitamura Mycenter 0 Parameter backup di Spikee

Spikee — Sat, 16 Aug 2025 18:50:37 +0000

In risposta a nelson eduardo. As far as I recall, there was no macro for the tool change. Kitamura used a separate PCB to handle all ATC functions, with the Fanuc PLC only providing the interface.

Commenti su Revolutionary – Polymer Concrete – Vibration Damping Material for Machine Frames di Spikee

Spikee — Sat, 16 Aug 2025 18:49:15 +0000

In risposta a Limo. I checked with Dyckhoff, the manufacturer of Durfill, and they confirmed it’s fine since the aluminum I used was anodized.

Commenti su Revolutionary – Polymer Concrete – Vibration Damping Material for Machine Frames di Limo

Limo — Sat, 19 Jul 2025 12:40:42 +0000

Hello
unfortunately it is not recommended to have direct contact between the aluminum and concrete while it is curing, since during the curing process the materials react with another. That is to some degree prohibited by the anodized layer. Also the durfill data sheet also states this explicitly. I would rather recommend using polymer concrete. That also has the benefit that you dont need anchors.

Commenti su Kitamura Mycenter 0 Parameter backup di nelson eduardo

nelson eduardo — Sat, 31 May 2025 01:42:34 +0000

In risposta a Spikee.

I’m writing from Peru. I’m having a problem with the missing macro program for my Kitamura MyCenter ZERO. Could you please sell me the tool change macro program?
This is my email: orabnel20@gmail.com
WhatsApp cell phone number: +51 924788857

Commenti su Kitamura Mycenter 0 Parameter backup di Spikee

Spikee — Mon, 26 May 2025 13:54:45 +0000

In risposta a Nele. Thanks

Commenti su È una truffa? A buon mercato 1000$ Aliexpress Atc CNC Mandrino di Spikee

Spikee — Mon, 26 May 2025 13:54:32 +0000

Hi, Sorry for the late reply. I have only heard good things so far.

Commenti su Kitamura Mycenter 0 Parameter backup di Nele

Nele — Wed, 05 Mar 2025 08:58:13 +0000

Vielen Dank für die Informationen, sie sind für mich sehr nützlich.

Commenti su Evita? Granito epossidico per DIY CNC di Spikee

Spikee — Mar 24 ott 2023 17:30:47 +0000

In risposta a Fredrik. It is much better than traditional steel. But not the best.

Commenti su Evitare? Granito epossidico per CNC fai da te di Fredrik

Fredrik — Mercoledì 11 ottobre 2023 20:30:56 +0000

In risposta a Spikee. After i made 3 parts(base, tower and bed) for my cnc mill in epoxi granite i will never go back to epoxy. Its hard to work with, expensive, hard to get good surface finish. Need vibro table etc, makes a mess everywhere and hard to clean. I ofcourse discovered uhpc after. But seeing how easy it is to work with, cheap, good surfacefinish, 90-150 mpa, easy to clean. its a no brainer for my next project. You can get premixed bags cheap.

Commenti su Come installare LinuxCNC 2.8.4 e sonda basic di Денис.

Денис. — Mer 04 ott 2023 19:16:16 +0000

хорошая работа.