Comentarios en Información de la fresadora CNC

Comentario en ¿Evitar? Granito epoxi para DIY CNC por Spikee

Spikee — Martes, 24 de octubre de 2023 17:30:47 +0000

En respuesta a Fredrik. It is much better than traditional steel. But not the best.

Comentario en ¿Evitar? Granito epoxi para bricolaje CNC por Fredrik

Fredrik — Miércoles 11 de octubre de 2023 20:30:56 +0000

En respuesta a Spikee. After i made 3 parts(base, tower and bed) for my cnc mill in epoxi granite i will never go back to epoxy. Its hard to work with, expensive, hard to get good surface finish. Need vibro table etc, makes a mess everywhere and hard to clean. I ofcourse discovered uhpc after. But seeing how easy it is to work with, cheap, good surfacefinish, 90-150 mpa, easy to clean. its a no brainer for my next project. You can get premixed bags cheap.

Comentario en Cómo instalar LinuxCNC 2.8.4 y probar básico por Денис.

Денис. — Miércoles, 04 de octubre de 2023 19:16:16 +0000

хорошая работа.

Comentario en ¿Esto es una estafa? Husillo CNC Aliexpress Atc 1000$ barato por Stefan

Stefan — viernes, 14 de julio de 2023 12:23:42 +0000

En respuesta a Spikee.

Hi Spikee,

thanks for your great feedback!
I already bought a 2 stage Schurter Filter (Name: 5500.2617.03) with 36A! I guess this should work as well! I place the name here for all others how need a similar divice!

Comentario en ¿Esto es una estafa? Husillo CNC Aliexpress Atc 1000$ barato por Spikee

Spikee — viernes, 14 de julio de 2023 11:57:03 +0000

En respuesta a Stefan. Hi , use a Schaffner 2 stage (net) filter, it is about 20-30 euro.

Comentario en ¿Evitar? Granito epoxi para DIY CNC por Spikee

Spikee — viernes, 14 de julio de 2023 11:55:37 +0000

En respuesta a MaHW H. Thanks for the insight!

Comentario en ¿Evitar? Granito epoxi para bricolaje CNC por MaHW H

MaHW H — viernes, 14 de julio de 2023 05:45:23 +0000

45-60GPa This is the normal range, choose ordinary aggregates can be. The key is whether you do post-processing, heating, etc.
But if you want to reach more than 75GPa,All aggregates should be specially selected, and special attention should be paid to the way of post-treatment, and some pressure storage may be required for a period of time.But at present, no company can complete this value with great certainty, and it requires constant testing and adjustment, and occasionally a few can achieve it, and there is no 100% guarantee that they can achieve this strength.

Comentario en ¿Esto es una estafa? Husillo CNC Aliexpress Atc 1000$ barato por Stefan

Stefan — viernes, 26 de mayo de 2023 08:20:28 +0000

En respuesta a Spikee.

Hi Spikee,
thanks for your help! I have ordered this spindle now, too! With Cumark VFD! The communication with the seller was really good – I did it with Alibaba – Aliexpress was not possible!

Currently I am searching for an EMI-Filter! Which one do you use?

Kind regards from Germany

Comentario en Dell Optiplex 7050 Mini LinuxCNC: La última opción rentable para entusiastas de CNC por Spikee

Spikee — jueves, 11 de mayo de 2023 13:42:07 +0000

En respuesta a Roy. Ooohh that is a nice find! , I might try those options out. Yeah i probably have 1x8gb instead of dual channel.

Comentario en Dell Optiplex 7050 Mini LinuxCNC: La última opción rentable para entusiastas de CNC por Roy

Roy — miércoles, 10 de mayo de 2023 19:49:37 +0000

Hi nice article! It does indeed perform better with turbo on, I’ve got the 7040 with the same 6500T CPU, I did compile my own kernel and set the timer at 1000Hz instead of 300Hz and some other settings which I forgot (I do have the config file) with the following parameters added a max latency of 30uS (YouTube and 4x glxgears for about 30minutes):
isolcpus=3 intel_pstate=disable processor.max_cstate=0 idle=poll cpufreq.default_governor=performance i915.enable_dc=0 ahci.mobile_lpm_policy=1 nomodeset quiet

What also did make a difference was replacing the RAM 1x8gb for 2x4gb so it will use the dual channels