Kommentare für CNC Router Info

Kommentar zu Kitamura Mycenter 0 Parameter backup von Spikee

Spikee — Sat, 16 Aug 2025 18:50:37 +0000

Als Antwort auf nelson eduardo. As far as I recall, there was no macro for the tool change. Kitamura used a separate PCB to handle all ATC functions, with the Fanuc PLC only providing the interface.

Kommentar zu Revolutionary – Polymer Concrete – Vibration Damping Material for Machine Frames von Spikee

Spikee — Sat, 16 Aug 2025 18:49:15 +0000

Als Antwort auf Limo. I checked with Dyckhoff, the manufacturer of Durfill, and they confirmed it’s fine since the aluminum I used was anodized.

Kommentar zu Revolutionary – Polymer Concrete – Vibration Damping Material for Machine Frames von Limo

Limo — Sat, 19 Jul 2025 12:40:42 +0000

Hello
unfortunately it is not recommended to have direct contact between the aluminum and concrete while it is curing, since during the curing process the materials react with another. That is to some degree prohibited by the anodized layer. Also the durfill data sheet also states this explicitly. I would rather recommend using polymer concrete. That also has the benefit that you dont need anchors.

Kommentar zu Kitamura Mycenter 0 Parameter backup von nelson eduardo

nelson eduardo — Sat, 31 May 2025 01:42:34 +0000

Als Antwort auf Spikee.

I’m writing from Peru. I’m having a problem with the missing macro program for my Kitamura MyCenter ZERO. Could you please sell me the tool change macro program?
This is my email: orabnel20@gmail.com
WhatsApp cell phone number: +51 924788857

Kommentar zu Kitamura Mycenter 0 Parameter backup von Spikee

Spikee — Mon, 26 May 2025 13:54:45 +0000

Als Antwort auf Nele. Thanks

Kommentar zu Ist das ein Betrug? Günstige 1000$ Aliexpress Atc CNC-Spindel von Spikee

Spikee — Mon, 26 May 2025 13:54:32 +0000

Hi, Sorry for the late reply. I have only heard good things so far.

Kommentar zu Kitamura Mycenter 0 Parameter backup von Nele

Nele — Wed, 05 Mar 2025 08:58:13 +0000

Vielen Dank für die Informationen, sie sind für mich sehr nützlich.

Kommentar zu Vermeiden? Epoxidgranit für DIY CNC von Spikee

Spikee — Di, 24. Okt. 2023 17:30:47 +0000

Als Antwort auf Fredrik. It is much better than traditional steel. But not the best.

Kommentar zu Vermeiden? Epoxidgranit für DIY CNC von Fredrik

Fredrik — Mi, 11. Okt. 2023 20:30:56 +0000

Als Antwort auf Spikee. After i made 3 parts(base, tower and bed) for my cnc mill in epoxi granite i will never go back to epoxy. Its hard to work with, expensive, hard to get good surface finish. Need vibro table etc, makes a mess everywhere and hard to clean. I ofcourse discovered uhpc after. But seeing how easy it is to work with, cheap, good surfacefinish, 90-150 mpa, easy to clean. its a no brainer for my next project. You can get premixed bags cheap.

Kommentar zu How to install LinuxCNC 2.8.4 and probe basic von Denis.

Денис. — Mi, 04. Okt. 2023 19:16:16 +0000

хорошая работа.