Kommentarer til CNC Router Info

Kommentar til Kitamura Mycenter 0 Parameter backup af Spikee

Spikee — Sat, 16 Aug 2025 18:50:37 +0000

Som svar til nelson eduardo. As far as I recall, there was no macro for the tool change. Kitamura used a separate PCB to handle all ATC functions, with the Fanuc PLC only providing the interface.

Kommentar til Revolutionary – Polymer Concrete – Vibration Damping Material for Machine Frames af Spikee

Spikee — Sat, 16 Aug 2025 18:49:15 +0000

Som svar til Limo. I checked with Dyckhoff, the manufacturer of Durfill, and they confirmed it’s fine since the aluminum I used was anodized.

Kommentar til Revolutionary – Polymer Concrete – Vibration Damping Material for Machine Frames af Limo

Limo — Sat, 19 Jul 2025 12:40:42 +0000

Hello
unfortunately it is not recommended to have direct contact between the aluminum and concrete while it is curing, since during the curing process the materials react with another. That is to some degree prohibited by the anodized layer. Also the durfill data sheet also states this explicitly. I would rather recommend using polymer concrete. That also has the benefit that you dont need anchors.

Kommentar til Kitamura Mycenter 0 Parameter backup af nelson eduardo

nelson eduardo — Sat, 31 May 2025 01:42:34 +0000

Som svar til Spikee.

I’m writing from Peru. I’m having a problem with the missing macro program for my Kitamura MyCenter ZERO. Could you please sell me the tool change macro program?
This is my email: orabnel20@gmail.com
WhatsApp cell phone number: +51 924788857

Kommentar til Kitamura Mycenter 0 Parameter backup af Spikee

Spikee — Mon, 26 May 2025 13:54:45 +0000

Som svar til Nele. Thanks

Kommentar til Is This A Scam? Billig 1000$ Aliexpress Atc CNC Spindel af Spikee

Spikee — Mon, 26 May 2025 13:54:32 +0000

Hi, Sorry for the late reply. I have only heard good things so far.

Kommentar til Kitamura Mycenter 0 Parameter backup af Nele

Nele — Wed, 05 Mar 2025 08:58:13 +0000

Vielen Dank für die Informationen, sie sind für mich sehr nützlich.

Kommentar til Undgå ? Epoxy granit til DIY CNC af Spikee

Spikee — Tir, 24. oktober 2023 17:30:47 +0000

Som svar til Fredrik. It is much better than traditional steel. But not the best.

Kommentar til Undgå ? Epoxy granit til DIY CNC af Fredrik

Fredrik — Ons, 11. oktober 2023 20:30:56 +0000

Som svar til Spikee. After i made 3 parts(base, tower and bed) for my cnc mill in epoxi granite i will never go back to epoxy. Its hard to work with, expensive, hard to get good surface finish. Need vibro table etc, makes a mess everywhere and hard to clean. I ofcourse discovered uhpc after. But seeing how easy it is to work with, cheap, good surfacefinish, 90-150 mpa, easy to clean. its a no brainer for my next project. You can get premixed bags cheap.

Kommentar til Sådan installeres LinuxCNC 2.8.4 og probe basic af Денис.

Денис. — Ons, 4. okt. 2023 19:16:16 +0000

хорошая работа.